Guys,
You might have bought LinkSys WAG120N Modem Router and wondering how to configure BSNL internet. Here is the simple steps to do it:
1. Conect your LinkSys Router with a LAN cable to your system
2. Give static IP to your sytem in range of 192.168.1.x
3. Open IE and type 192.168.1.1
4. Username : admin, Password: admin(Default)
5. Goto Basic setup page
6. Select Encapsulation : RFC 2516 PPPoE
7. Multiplexing : LLC
8. Leave PCR and SCR as blank
9. Make Autodetect as disable
10. Under Virtual Circuit
VPI: 0
VCI:35
11.Under PPPoE settings
User Name: your bsnl user id
Password: your bsnl password
Service Name: Dataone
Thats all you need. Reboot the router. After Reboot DSL and Internet lights should be glowing.
Happy surfing Folks
If you have any doubts mail me @ dhruva.darshan@hotmail.com
You might have bought LinkSys WAG120N Modem Router and wondering how to configure BSNL internet. Here is the simple steps to do it:
1. Conect your LinkSys Router with a LAN cable to your system
2. Give static IP to your sytem in range of 192.168.1.x
3. Open IE and type 192.168.1.1
4. Username : admin, Password: admin(Default)
5. Goto Basic setup page
6. Select Encapsulation : RFC 2516 PPPoE
7. Multiplexing : LLC
8. Leave PCR and SCR as blank
9. Make Autodetect as disable
10. Under Virtual Circuit
VPI: 0
VCI:35
11.Under PPPoE settings
User Name: your bsnl user id
Password: your bsnl password
Service Name: Dataone
Thats all you need. Reboot the router. After Reboot DSL and Internet lights should be glowing.
Happy surfing Folks
If you have any doubts mail me @ dhruva.darshan@hotmail.com
